HPE HP 867959-B21 DL360 G10 8SFF Configure to Order CTO Server

Hewlett Packard DL360 G10 Server

Form Factor:

1U Rack

Chassis Types:

• 8SFF with options supporting: +2 SFF or 2 NVMe or 2 Dual uff (4x m.2 cartridges)

• 10 SFF NVME Premium

• 4 LFF

Note: New rear drive option available on all DL360 G10 chassis types for additional boot/storage: +1SFF or 1 Dual uff (2x m.2 cartridges)

System Fans:

Single rotor hot plug fans will be included

For 4 LFF and 8 SFF chassis:

• 1 CPU – includes 5 standard fans

• 2 CPUs – includes 7 standard fans

Note: Optional High Performance Fan Kit available (includes 7 fans).

Note: The DL360 G10 will support up to 7 fans with fan redundancy built in. One fan rotor failure will place server in degraded mode but fully functional. Two fan rotor failures could provide warning and imminent server shutdown.

For 10 NVMe Premium Chassis: 2 CPUs – includes 7 high performance fans as standard

Processors:

Up to 2 of the following depending on model:

• Platinum 8180M, 2.5GHz, 28C, 38.50MB, 205W, 3 @ 10.4 Gt/s, 2666 MT/s, 1.5TB

• Platinum 8180, 2.5GHz, 28C, 38.50MB, 205W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8176, 2.1GHz, 28C, 38.50MB, 165W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8170, 2.1GHz, 26C, 35.75MB, 165W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8168, 2.7GHz, 24C, 33.00MB, 205W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8165, 2.3GHz, 24C, 33.00MB, 205W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8164, 2.0GHz, 26C, 35.75MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8160M, 2.1GHz, 24C, 33.00MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 1.5TB

• Platinum 8160, 2.1GHz, 24C, 33.00MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8158, 3.0GHz, 12C, 24.75MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8156, 3.6GHz, 4C, 16.50MB, 105W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Platinum 8154, 2.0GHz, 16C, 22.00MB, 125W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

Note: Platinum Processors:

• 2 and 4 socket capable, 2S – 2UPI, 4S – 3UPI, 8S – 3UPI @ 10.4 GT/s.

• 6-Channel DDR4 @ 2666 Mt/s.

• 768 GB max memory capacity (1.5TB on select SKUs).

• Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512 (2x 512-bit FMA).

• 48 lanes PCI-e 3.0, advanced RAS

• Gold 6154, 3.0GHz, 18C, 24.75MB, 200W, 3 @ 10.4 Gt/s, 2666 MT/s, 768GB

• Gold 6152, 2.1GHz, 22C, 30.25MB, 140W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6150, 2.7GHz, 18C, 24.75MB, 165W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6148, 2.4GHz, 20C, 27.50MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6146, 3.2GHz, 12C, 24.75MB, 165W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6144, 3.5GHz, 8C, 24.75MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6143, 2.8GHz, 16C, 22.00MB, 205W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6142, 2.6GHz, 16C, 22.00MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6140, 2.3GHz, 18C, 24.75MB, 140W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6138, 2.0GHz, 20C, 27.50MB, 125W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6136, 3.0GHz, 12C, 24.75MB, 150W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6134M, 3.2GHz, 8C, 24.75MB, 130W, 3 @ 10.4 Gt/s, 2666MT/s, 1.5TB

• Gold 6134, 3.2GHz, 8C, 24.75MB, 130W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6132, 2.6GHz, 14C, 19.25MB, 140W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6130, 2.1GHz, 16C, 22.00MB, 125W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6128, 3.4GHz, 6C, 19.25MB, 115W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 6126, 2.6GHz, 12C, 19.25MB, 125W, 3 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 5122, 3.6GHz, 4C, 16.50MB, 105W, 2 @ 10.4 Gt/s, 2666MT/s, 768GB

• Gold 5120, 2.2GHz, 14C, 19.25MB, 105W, 2 @ 10.4 Gt/s, 2400MT/s, 768GB

• Gold 5118, 2.3GHz, 12C, 16.50MB, 105W, 2 @ 10.4 Gt/s, 2400MT/s, 768GB

• Gold 5117, 2.0GHz, 14C, 19.25MB, 105W, 2 @ 10.4 Gt/s, 2400MT/s, 768GB

• Gold 5115, 2.4GHz, 10C, 13.75MB, 85W, 2 @ 10.4 Gt/s, 2400MT/s, 768GB

Note: Gold Processors:

• 2 and 4 socket capable, 2S – 2UPI, 4S – 3UPI @ 10.4 GT/s.

• 6-Channel DDR4 @ 2400 Mt/s (SKU 5122 – supports 2666MT/s).

• 768 GB max memory capacity (1.5TB on select SKUs).

• Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512 (1x 512-bit FMA) (SKU 5122 – supports 2x 512 bit FMA).

• 48 lanes PCI-e 3.0, standard RAS

• Silver 4116, 2.1GHz, 12C, 16.50MB, 85W, 2 @ 9.6 Gt/s, 2400MT/s, 768GB

• Silver 4114, 2.2GHz, 10C, 13.75MB, 85W, 2 @ 9.6 Gt/s, 2400MT/s, 768GB

• Silver 4112, 2.6GHz, 4C, 8.25MB, 85W, 2 @ 9.6 Gt/s, 2400MT/s, 768GB

• Silver 4110, 2.1GHz, 8C, 11.00MB, 85W, 2 @ 9.6 Gt/s, 2400MT/s, 768GB

• Silver 4108, 1.8GHz, 8C, 11.00MB, 85W, 2 @ 9.6 Gt/s, 2400MT/s, 768GB

Note: Silver Processors:

• 2 socket capable, 2S – 2UPI @ 9.6 GT/s.

• 6-Channel DDR4 @ 2400 Mt/s (768 GB max memory capacity).

• Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512 (1x 512-bit FMA).

• 48 lanes PCI-e 3.0, advanced RAS

• Bronze 3106, 1.7GHz, 8C, 11.00MB, 85W, 2 @ 9.6 Gt/s, 2133MT/s, 768GB

• Bronze 3104, 1.7GHz, 6C, 8.25MB, 85W, 2 @ 9.6 Gt/s, 2133MT/s, 768GB

Note: Bronze Processors:

• 2 socket capable, 2S – 2UPI @ 9.6 GT/s.

• 6-Channel DDR4 @ 2400 Mt/s (768 GB max memory capacity).

• Intel AVX-512 (1x 512-bit FMA).

• 48 lanes PCI-e 3.0, advanced RAS

Chipset:

Intel C621 Chipset

On System Management Chipset:

HPE iLO ASIC

Memory:

Type HPE DDR4 Smart Memory

Registered (RDIMM), Load Reduced (LRDIMM).

DIMM Slots Available 24 12 DIMMS slots per processor, 6 channels per

processor, 2 DIMMs per channel

Maximum capacity (LRDIMM) 3.0TB 24 x 128GB LRDIMM @ 2666 Mt/s

Maximum capacity (RDIMM) 768GB 24 x 32GB RDIMM @ 2666 MT/s

Maximum capacity (NVDIMM) 192GB 12 x 16GB NVDIMM @ 2666 Mt/s

NOTE: NVDIMMs can be mixed with RDIMMs only.

NOTE: Maximum memory per socket is dependent on processor selection. Processors supporting 1.5 TB per CPU is indicated by the “M” in the processor model names (i.e. 8160M).

NOTE: Mixing of RDIMM and LRDIMM memory is not supported.

Memory Protection:

• Advanced ECC

Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.

• Online Space

Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.

Expansion Slots:

Primary GPU Riser

Expansion Slot # 1

Technology: PCI-e 3.0

Bus Width: x16

Connector Width: x16

Processor: CPU1

Slot Form Factor: Full-height, ¾ length (up to 9.5”)

Expansion Slot # 2

Technology: PCI-e 3.0

Bus Width: x8

Connector Width: x8

Processor: CPU1

Slot Form Factor: Low profile

Primary SATA M.2 Riser

Expansion Slot # 1

Technology: PCI-e 3.0

Bus Width: x16

Connector Width: x16

Processor: CPU1

Slot Form Factor: Full-height, ¾ length (up to 9.5”)

Expansion Slot # 2

Technology: PCI-e 3.0

Bus Width: x16

Connector Width: x16

Processor: CPU1

Slot Form Factor: Low profile

Primary NVMe Riser

Expansion Slot # 1

Technology: PCI-e 3.0

Bus Width: x16

Connector Width: x16

Processor: CPU1

Slot Form Factor: Full-height, ¾ length (up to 9.5”)

Expansion Slot # 2

Technology: PCI-e 3.0

Bus Width: x8

Connector Width: x8

Processor: CPU1

Slot Form Factor: Low profile

Secondary Riser

Expansion Slot # 3

Technology: PCI-e 3.0

Bus Width: x16

Connector Width: x16

Processor: CPU2

Slot Form Factor: Low profile or Full-height; ¾ length (up to 9.5”)

NOTE: If secondary full height kit is installed, then primary PCI-e Slot #2 cannot be used. Only 2 full height slots are supported.

Controllers

Software RAID

HPE Smart Array S100i SR Gen10 SW RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.

NOTE: The S100i is a 14-port SATA controller, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2 options on the Primary Riser.

NOTE: The S100i supports windows only.

Essential RAID Controllers:

HPE Smart Array E208i-a SR Gen10 Controller

HPE Smart Array E208i-a SR G10 LH Controller

HPE Smart Array E208i-p SR Gen10 Controller

HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controllers:

HPE Smart Array P408i-a SR Gen10 Controller

HPE Smart Array P408i-a SR G10 LH Controller

HPE Smart Array P408i-p SR Gen10 Controller

HPE Smart Array P408e-p SR Gen10 Controller

HPE Smart Array P816i-a SR Gen10 Controller

HPE Smart Array P816i-a SR G10 LH Controller

NOTE: If GPGPU is needed then please order the LH controller (low profile heatsink) to allow GPU to fit in the chassis

Internal Storage Devices:

Optical Drive Available on 8SFF and 4LFF CTO Servers as an option (DVD-ROM or DVD-RW)

Hard Drives Non ship standard

Maximum Storage

Hot Plug SFF SAS HDD 26.4 TB 8+2+1 x 2.4 TB (with optional UMB + rear drive option)

Hot Plug SFF SATA HDD 22 TB 8+2+1 x 2.0 TB (with optional UMB + rear drive option)

Hot Plug SFF SAS SSD 168.3 TB 8+2+1 x 15.3 TB (with optional UMB + rear drive option)

Hot Plug SFF SATA SSD 42.24 TB 8+2+1 x 3.84 TB (with optional UMB + rear drive option)

Hot Plug SFF NVMe PCI-e SSD 76.8 TB 10 x 7.68 TB NVMe

Hot Plug LFF SAS HDD 48 TB 4 x 12 TB

Hot Plug LFF SATA HDD 48 TB 4 x 12 TB

Hot Plug LFF SAS SSD 3.2 TB 4 x 800 GB

Hot Plug LFF SATA SSD 7.68 TB 4 x 1.92 TB

Power Supply:

HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency.

HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% and 96% efficiency.

NOTE: Also available in -48VDC and 227VAC/380VDC power inputs.

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency.

NOTE: 1600W Power supplies only support high line voltage (200 VAC to 240 VAC).

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center. All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit.

Interfaces:

Serial 1 port - optional

Video 1 Front – Display port (optional 8SFF and 4LFF only)

1 Rear – VGA port (standard on all chassis types)

Network Ports 4x 1GbE embedded NIC (standard on all chassis types)

1 FlexibleLOM slot available on all chassis types (supporting

various NICs adapters)

iLO Report Mgmt Port 1GB Dedicated

MicroSD Slot 1 MicroSD slot

Note: The MicroSD slot is not hot-pluggable, please power

down before removal.

USB 3.0 Up to 5 total: 1 front, 2 rear, 2 internal (standard on all chassis

types) +1 optional USB 2.0 front (on 8 SFF and 4 LFF only)

SID (Systems Insight Display) Optional for all chassis types NOTE: Will lose iLO Service Port if

selecting this option.

Operating Systems and Virtualization Software

• Windows Server 2019 (most recent version)

• Windows Server 2012 R2 (most recent version)

• Windows Server 2016 (most recent version)

• VMware ESXi 6.0 U3

• VMware ESXi 6.5 and U1 (upon release)

• Red Hat Enterprise Linux (RHEL) 6.9 and 7.3

• SUSE Linux Enterprise Server (SLES) 11 SP4 and 12 SP2

• ClearOS

NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost.

• CentOS

Industry Standard Compliance:

• ACPI 6.1 Compliant

• PCI-e 3.0 Compliant

• WOL Support

• Microsoft® Logo certifications

• PXE Support

• USB 3.0 Compliant

• USB 2.0 Compliant (only on optional Universal Media Bay)

• SMBIOS 3.1

• UEFI 2.6 (Unified Extensible Firmware Interface Forum)

• Redfish API

• IPMI 2.0

• Secure Digital 4.0

• TPM 1.2 and 2.0 support

• Advanced Encryption Standard (AES)

• Triple Data Encryption Standard (3DES)

• SNMP v3

• TLS 1.2

• DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)

• Active Directory v1.0

• ASHRAE A3/A4

• Energy Star

Graphics

Integrated Video Standard

• Video modes up to 1920 x 1200 @ 60Hz (32bpp)

• 16MB Video Memory

HPE iLO 5 on system management memory

• 32MB Flash

• 4 Gbit DDR3 with ECC protection