HPE DL380 G9 8SFF (2) E5-2697v3, 64GB RAM, 4.8TB 12G SAS Server Bundle

Server Specifications:

HPE ProLiant DL380 Gen9 Server
Processor (Up to two of the following depending on model):

E5-2699v3,E5-2698v3,E5-2697v3,E5-2695v3,E5-2690v3,E5-2687Wv3,E5-2683v3,E5-2680v3,E5-2670v3,E5-2667v3,E5-2660v3,E5-2650v3,E5-2650Lv3,E5-2643v3,E5-2640v3,E5-2637v3,E5-2630v3,E5-2630Lv3,E5-2623v3,E5-2620v3,E5-2609v3,E5-2603v3,E5-2699v4,E5-2698v4,E5-2697v4,E5-2697Av4,E5-2695v4,E5-2690v4,E5-2687Wv4,E5-2683v4,E5-2680v4,E5-2667v4,E5-2660v4,E5-2650v4,E5-2650Lv4,E5-2643v4,E5-2640v4,E5-2637v4,E5-2630v4,E5-2630Lv4,E5-2623v4,E5-2620v4,E5-2609v4,E5-2603v4,E5-2699Av4
NOTE: All processors above 120W use a high efficiency Heatsink.Doublewide PCIe cards are only supported with this Heatsink. For processors with a standard Heatsink that require double wide PCIe cards, the Graphics Enablement kit option is also required (719082-B21).
NOTE: Mixing of E5-2600v3 and E5-2600v4 processors is not supported.
NOTE: Field upgrade from E5-2600v3 to E5-2600v4 is supported.
NOTE: All processors support Hyper-Threading except E5-2609 v4/v3 and E5-2603 v4/v3.
NOTE: Processors consuming up to 120w ship with standard heatsink. Processors consuming over 120w ship with a High Performance heatsink as standard except the Intel Xeon E5-2690v4. A High Performance heatsink can be added to help reduce power consumption (795235-B21).

Chipset:

- Intel C610 Series Chipset
- Intel E5-2600v3 Processor Family
- Intel E5-2600v4 Processor Family

On System Management Chipset:

- HPE iLO (Firmware HPE iL04 2.0) 4GB NAND

Memory (one of the following depending on model):

Type:
HPE SmartMemory
DDR4 Registered (RDIMM), Load Reduced (LRDIMM) of Persistent Memory (NVDIMM)
DIMM Slots Available: 24 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per channel)
Maximum Capacity (LRDIMM): 3TB (24 x 128GB LRDIMM @ 2400MHz)
Maximum Capacity (RDIMM): 768GB (24 x 32GB RDIMM @ 2400MHz)
Maximum Capacity (NVDIMM): 128GB (16 x 8GB NVDIMM)
NVDIMM support only with the E5-2600v4 processors, and RDIMMS only.
NOTE: mixing of 2133 and 2400MHz memory is not supported.
NOTE: mixing RDIMM and LRDIMM memory is not supported.
NOTE: the 128GB LRDIMM may not be mixed with other DIMM capacities/types

Memory Protection:

Advanced ECC: Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
Online Spare: Memory online spare mode detects a rank that is degrading and witches operation to the spare rank.

Expansion Slots:

Primary Riser (Standard)
Expansion Slot Number: 1
Technology: PCIe 3.0
Bus Width: x8
Connector Width: x16
Bus Number: 7
Form Factor: Full-Height, Half-Length Slot
Notes: Proc 1
Expansion Slot Number: 2
Technology: PCIe 3.0
Bus Width: x8
Connector Width: x16
Bus Number: 10
Form Factor: Full-Height, Half-Length Slot
Notes: Proc 1
Expansion Slot Number: 3
Technology: PCIe 3.0
Bus Width: x8
Connector Width: x8
Bus Number: 13
Form Factor: Full-Height, Half-Length Slot
Notes: Proc 1
NOTE: Bus Width indicates the number of physical electrical lanes to the connector.
NOTE: All slots support PCIe cards to 150W or more, but an additional Power Cable Kit is required.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High Performance Heatsink. For Processors requiring double wide GPU support please order the CPU enablement kit (719082-B21).

Slot 2 PCIe Riser (Optional 3-Slot) 719073-B21

Expansion Slot Number: 4
Technology: PCIe 3.0
Bus Width: x16
Connector Width: x16
Bus Number: 16
Form Factor: Full-Height, Full-Length Slot
Notes: Proc 2
Expansion Slot Number: 5
Technology: PCIe 3.0
Bus Width: x16
Connector Width: x16
Bus Number: 20
Form Factor: Full-Height, Full-Length Slot
Notes: Proc 2
Expansion Slot Number: 6
Technology: PCIe 3.0
Bus Width: x8
Connector Width: x8
Bus Number: 23
Form Factor: Full-Height, Half-Length Slot
Notes: Proc 2
NOTE: Bus Width indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support PCIe cards to 150W or more, but an additional Power Cable Kit is required.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High Performance Heatsink. For processors requiring double wide GPU support please order the GPU enablement kit (719082-B21).

Slot 1 PCIe Riser (Optional 2-Slot) 719076-B21

Expansion Slot Number: 2
Technology: PCIe 3.0
Bus Width: x16
Connector Width: x16
Bus Number: 0x05
Form Factor: Full-Height, Full-Length Slot
Notes: Proc 1
Expansion Slot Number: 2
Technology: PCIe 3.0
Bus Width: x8
Connector Width: x8
Bus Number: 0x08
Form Factor: Full-Height, Half-Length Slot
Notes: Proc 1
NOTE: Bus Width indicates the number of physical electrical lanes running to the connector.
NOTE: This will replace the standard primary riser and supports double wide cards.
NOTE: All slots support PCIe cards to 150W or more, but an additional Power Cable Kit is required.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High Performance Heatsink. For processors requiring double wide GPU support please order the GPU enablement kit (719082-B21).

Storage Controller (one of the following depending on model):

Entry Models: HPE Dynamic Smart Array B140i Controller
NOTE: The embedded B140i controller will operate in UEFI only mode. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode setting part, 758959-B22.
NOTE: The B140i defaults to AHCI off the chipset. Smart array needs to be enabled on the SATA only models if required.
NOTE: The B140i will not operate in Legacy mode.
Base Models: HPE Dynamic Smart Array B140i Controller, HPE Flexible Smart Array P440ar/2G FIO Controller, HPE Flexible Smart Array P840/4G FIO Controller, HPE Smart Array P840ar/2G controller
Performance Models: HPE Dynamic Smart Array B140i Controller, HPE Flexible Smart Array P440ar/2GB

Internal Storage Devices (one of the following depending on model):

Optical Drive: ships standard in Performance Models. Optional: DVD-ROM, DVD-RW
Hard Drives: Non ship standard
Hard Drive Bays: 8 SFF with optional Universal Media Bay, 8 SFF bay or 6 NVME drive options, 24 SFF plus optional 2 SFF drives rear, 12 LFF plus optional 3 LFF drives rear
NOTE: The 3 LFF rear drives will consume space for the secondary user.
NOTE: The 12 LFF chassis also supports 2 SFF rear which allows for the second riser.
NOTE: The 6 NVMe drive option can only be leveraged in the SFF chassis and replaces Bay 2.
4 LFF Drive Bays Total
NOTE: The Universal Media Bay (724865-B21) not available with the LFF chassis or the 24 SFF front end, and can only be populated in Bay 1.
NOTE: The 8 SFF can be upgraded with a drive cage to 16 or 24 SFF with field upgrades. For optimal upgrade Bay 2 should be populated second, with Bay 3 the last to be populated for a field upgrade to 24 SFF.
NOTE: The 4 LFF chassis cannot be upgraded to 12 LFF in the field.
NOTE: All Pre-configured Chassis come with an embedded 10-Port SATA controller. Optional HPE Flexible Smart Array and Smart SAS HBA Controllers can be added.
Maximum Internal Storage:
Hot Plug SFF SAS 52.0TB 24+2 x 2TB (with optional rear SFF drive cage)
Hot Plug SFF SATA 52.0TB 24+2 x 2TB (with optional SFF drive cage)
Hot Plug LFF SAS 180.0TB 12+3 x 12TB (with optional rear LFF drive cage)
Hot Plug LFF SATA 180.0TB 12+3 x 12TB (with optional rear LFF drive cage)
Hot Plug SFF SAS SSD 397.8TB 24+2 x 15.3TB (with optional rear SFF drive cage)
Hot Plug SFF SATA SSD 199.68TB 24+2 x 7.68TB (with optional rear SFF drive cage)
Hot Plug LFF SATA SSD 57.6B 12+3 x 3.84TB (with optional rear LFF drive cage)
Hot Plug LFF SAS SSD 28.8TB 12+3 x 1.92TB (with optional rear LFF drive cage)
Hot Plug SFF NVMe PCIe SSD 46.08TB NVME 6 x 7.68TB NVMe plus 36TB with 18SFF (Bay 1, Bay 3 + 36TB SFF and optional rear drive support)

Power Supply:

HPE 500W Flex Slot Platinum Hot Plug Power Supply
NOTE: Available in 94% efficiency.
HPE 800W Flex Slot Platinum Hot Plug Power Supply
NOTE: Available in 94% and 96% efficiency.
NOTE: Also available in -48DC and 227VAC/380VDC power inputs.
HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply
NOTE: Available in 94% efficiency.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen9 Performance Servers. Flex Slot power supplies are certified for high efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit.

System Fans (one of the following depending on model):

2p Model – 6 Redundant Fans
NOTE: 1P models typically ship with 4 standard fans. The second processor option kit contains 2 additional fans.
NOTE: The 12 LFF and 24 SFF chassis ship with 6 high performance fans as standard.
NOTE: High performance fan kit is available to meet ambient temperature environments.
NOTE: High performance fan kit is required for Passive GPU support.
NOTE: The 8 SFF Bay 1 kit (719067-B21) will ship with 6 high efficiency fans.

Interfaces:

Serial: Optional
Video: 2 (1 front, optional via Universal Media Bay, 724865-B21), 1 back not active simultaneously
FlexibleLOM Network Ports: 4 x 1GB ports shipping standard with optional FlexibleLOM.
HPE iLO Remote Management: 1 Gb Dedicated
Network Port:
Micro SD Slot: 1 Micro SD
NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered.
USB 3.0: Up to 5 total: 1 front, 2 rear, 2 internal (secure), 2 optional USB 2.0 front via Universal Media Bay
SID (Systems Insight Display): Optional
NOTE: Not shipping as standard. Available as a CTO option or as a field upgrade (768900-B21).

Operating Systems and Virtualization Software Support for ProLiant Servers:

Microsoft Winders Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
Citrix XenServer
ClearOS
NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost. It is available via CTO preload, intelligent Provisioning or via download.

Upgradeability:

Upgradeable to 2 processors (36 Cores)
NOTE: Processor upgrade available from Intel Xeon Processors E5-2600v3.
Up to 24 DIMM slots available for higher Memory capacity
FlexibleLOM connector for 1 Gigabit or 10 Gigabit networking options
HPE Flexible Smart Array or smart HBA Controllers
Embedded 10-Port SATA, B140i as standard
Optional 3 slot riser (x16, x16, x8), or 2 slot primary riser (x16, x8)
NOTE: To take advantage of the additional 3 PCI slot upgrade, the second processor must be installed.
Redundant Power Supply
Optical Drive supported via Universal Media Bay
NOTE: The Universal Media bay provides front VGA and 2xUSB 2.0, plus ability to add 2SFF and Optical.
NOTE: Universal Media bay is only available with 8 or 8+8SFF chassis and can be populated in Bay 1 only.
HPE Legacy Mode (FIO only, 758959-B22)
NOTE: UEFI is the default mode for CTO and BTO SKUs. Can change default to legacy via CTO.
Industry Standard Compliance:
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft Logo certifications
USB 3.0 Support
USB 2.0 Support
NOTE: This support is on the optional Universal Media Bay.
Energy Star
ASHRAE A3/A4
NOTE: The DL380 G9 is now one of the first HPE ProLiant G( Servers with Extended Ambient Support up to 45 C for data center infrastructures designed for better energy efficiency such as but not limited to fresh air cooling.
UEFI (Unified Extensible Firmware Interface Forum)
NOTE: UEFI is the default for the DL380 G9. Legacy model can be selected in the field as a CTO option (758959-B22).

Graphics:

Integrated Matrox G200eH2 video standard with 16MB of Video RAM
- 1280 x 1024 (32 bpp)
- 1920 x 1200 (16 bpp)
HPE iLO On System Management Memory
- 16 MB Flash
- 256 MB DDR3 with ECC (112 MB after ECC and video)

Form Factor (one of the following depending on model):

2U Rack Form Factor
8 SFF & 24 SFF Drive Bay Version
4 LFF & 12 LFF Drive Bay Version