Used HPE DL360p G8 2 x E5-2630LV2, 64GB RAM, 6 x 300GB, 2 x 750W Power Supply
The DL360 G8 is a space-conscious 1U server with a 2-processor slot server designed for data centers with limited space but still offers industry-leading feature sets. HPE builds servers to protect your investment and extend lifetime usage with reliability, accessibility, and serviceability features.
Manufacturer: Hewlett Packard
Type: Server Bundle
Model: DL360p G8 8SFF Chassis
Processor: (2) XEON E5-2630LV2 2.4GHZ/15M 6C
Memory: (4)x HPE 16GB 2RX4 PC3-12800R DIMM
Networking: (1) HP Ethernet 1GB 4-Port 331FLR FIO Adapter Kit
Power Supply: (2) 750W Power Supply
Optical Drive: None Included
Storage: (6)x 300GB 6Gbps 10K SFF 2.5" SAS Internal Hard Drive
Cache Module: 1GB FBWC - used battery
Rail Kit/Cables: 1U SFF Ball Bearing Rack Kit & Security Bezel
Not the exact configuration you're looking for? Contact Us for a custom configuration!
HPE ProLiant DL360p Gen8 Server Specifications
Cache Memory (one of the following depending on model):
30MB (1x30MB) Level 3 NOTE: For Twelve-core processors.
25MB (1x25MB) Level 3 NOTE: For Ten-core processors.
20MB (1x20MB) Level 3 NOTE: For Eight-core processors.
15MB (1x15MB) Level 3 NOTE: For Six-core processors.
10MB (1x10MB) Level 3 NOTE: For Quad-core processors.
5MB (1x5MB) Level 3 NOTE: For Dual-core processors.
Intel C600 Series Chipset
Intel E5-2600 Processor Family
Intel E5-2600 v2 Processor Family
Upgradeable to two processors (24 Cores)
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2600 to E5-2600 v2.
Up to 24 DIMM slots available for higher memory capacity
Up to 8 SFF Hard Drive Bays; Or 4 LFF or 10 SFF Drive Bay (optional through CTO below)
FlexibleLOM slot for 1Gigabit or 10 Gigabit Ethernet or QDR/FDR InfiniBand networking options
2 PCIe 3.0 I/O slots for additional communications and storage expansion
Redundant Power Supply
Optical Drive Bay (8 SFF/4 LFF)
On System Management Chipset:
HP iLO (Firmware: HP iLO 4)
Memory (one of the following depending on model):
Type: HP SmartMemory DDR3 Registered (RDIMM), Load Reduced (LRDIMM) or Unbuffered (UDIMM) memory
DIMM Slots Available: 24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs per channel)
Maximum Capacity (LRDIMM): 768GB (24 x 32GB@1066MHz)
Maximum Capacity (RDIMM): 384GB (24 x 16GB@1333MHz)
Maximum Capacity (UDIMM): 128GB (16 x 8GB@1333MHz)
Maximum Capacity (HDIMM): 384GB (24 x 16GB@1333MHz)
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8.
NOTE: LRDIMM, RDIMM, UDIMM and HDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
NOTE: If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available. For maximum speed on some memory options on 16 DIMM slots may be populated. NOTE: When using HDIMMs, 12 DIMMs per processor are required. NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, 1333MHz, or 1066MHz.
HP ProLiant Gen8 servers offer a new networking technology - Flexible Network Technology. The HP ProLiant DL360p Gen8 server offers the customer the choice of 1 Gigabit and/or 10 Gigabit networking solutions. For additional details see the Networking Section of this document.
Entry Models: HP Ethernet 1Gb 4-port 331FLR Adapter
Base Models: HP Ethernet 1Gb 4-port 331FLR Adapter
Performance Models (One of the following depending on model):
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 10Gb 2-port 533FLR Adapter
Energy Star Certified Models: HP Ethernet 1Gb 4-port 331FLR Adapter
Expansion Slot #1
Technology: PCI-e 3.0
Bus Width*: x8
Connector Width: x8
Form Factor: Low Profile Slot
Notes: Activated when installed with processor 1
Expansion Slot #2
Technology: PCI-e 3.0
Bus Width*: x16
Connector Width: x16
Form Factor: Full-Height, Half-Length Slot
Notes: Activated when installed with processor 1
*Indicates the number of physical electrical lanes running to the connector.
NOTE: Two PCI-e 3.0 expansion slots: (1) Half-length, full-height slot and (1) low-profile slot.
HP Server ROM:
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
Storage Controller (one of the following depending on model):
Entry Models: HP Smart Array P420i/ZM (RAID 0/1/1+0)
Base Models: HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Performance Models: HP Smart Array P420i/2GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Energy Star Models (one of the following depending on model):
HP Smart Array P420i/1GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
HP Smart Array P420i/ZM (RAID 0/1/1+0)
Internal Storage Devices:
Diskette Drive: None
Optical Drive: Optional: DVD-ROM or DVD-RW NOTE: This option available with all 8SFF or 4LFF drive models.
Hard Drives: None ship standard
Hard Drive Bays: 8 SFF drive bays total with Optical drive bay
Optional: 4 LFF bays with Optical drive bay
Optional: 10 SFF bays without optical
NOTE: HP ProLiant DL360p Series servers offer both SFF, and LFF versions in CTO. The Optical Drive bay is available with the 4 LFF and 8 SFF models only.
NOTE: LFF versions are not an upgradeable option from SFF models, or vice versa.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit. These part numbers for single HDD blanks below are also provided should the customer require replacement HDD blanks for their server.
Maximum Internal Storage:
Hot Plug SFF SAS, 20.0TB, 10 x 2TB
Hot Plug SFF SATA, 20.0TB, 10 x 2TB
Hot Plug LFF SAS, 32.0TB, 4 x 8TB (with optional LFF drive cage)
Hot Plug LFF SATA, 32.0TB, 4 x 8TB (with optional LFF drive cage)
Hot Plug SFF SAS SSD, 19.2TB, 10 x 1.92TB
Hot Plug SFF SATA SSD, 16.0TB, 10 x 1.6TB
Hot Plug LFF SAS SSD, 6.4TB, 4 x 1.6TB (with optional LFF drive cage)
Video: 2 (1 front, 1 back) not active simultaneously NOTE: Front interface is a Mini-video connector and requires Front Video Adapter Kit (PN 655915-B21).
FlexibleLOM Network Ports: Some models come standard with 4 x 1GB ports while others come with 2 x 10GB ports (See HP Networking section below for more details and options).
HP iLO Remote Management Network Port: 1Gb Dedicated
SD slot: 1 Internal secure NOTE: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered.
USB 2.0 Ports: 7 total: 4 rear, 2 front, 1 internal (secure)
Industry Standard Compliance:
ACPI 2.0b Compliant
PCIe 3.0 Compliant
Microsoft® Logo certifications
USB 2.0 Compliant
Server Power Cords:
All Pre-configured Models servers ship with a high voltage server to PDU power cord.
NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cord that connects to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to power distribution units (PDUs) in data center racks and now ship standard with a PDU 6-foot C-14 to C13 power cord (A0K02A). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the 6-foot NEMA 5-15 to C13 power cord must be ordered separately (AF556A).
Common Slot Power Supply:
NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported.
HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest power supply efficiency without degrading system performance. HP CS power supplies are tested by the Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP CS power supply options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available in three power output options - 460W, 750W, and 1200W - allowing the customer to "right-size" a power supply for their specific server configuration. All HP Common Slot power sources are UL, CE Mark Compliant, hot-plug and support redundant configurations.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same output and efficiency rating. If non-matched power supplies are inserted you will get errors and operation will fail.
HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power Discovery (IPD) solution. IPD is the first technology to create an automated, energy-aware network between IT systems and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and downtime costs across data centers.
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your needs.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus independently tests power supply efficiency and publicly posts the results on 80Plus.org.
Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can be purchased through power supply option kits (see Power Supplies for part numbers).
System Fans (one of the following depending on model):
6 fan modules ship standard in 1 processor models
8 fan modules ship standard in 2 processor models
The DL360p Gen8 will support up to 8 fans with fan redundancy built in. One fan rotor failure will place server in degraded mode but fully functional. Two fan rotor failures could provide warning and imminent server shutdown.
NOTE: The processor option kit contains 2 additional fan modules, when upgrading from a 1 processor to two processor models.
Operating System and Virtualization Software Support for ProLiant Servers:
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor (one of the following depending on model):
1U Rack form factor
8 SFF and 10 SFF Drive Bay Versions:
1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 27.5" (69.85cm) Length
4 LFF Drive Bay Version:
1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 29.5" (74.67cm) Length
Serial interface control