Dell EqualLogic PS4100X iSCSI SAN Storage Array


Product Line:
Storage Array
Maximum Number of Drives Supported:
Drive Form Factor:
2.5 in
Drive Interface:
RAID Support:
RAID 5, 6, 10, 50
Adding to cart… The item has been added

Used Dell EqualLogic PS4100X drive iSCSI SAN Storage Array

The EqualLogic PS4100X continues the EqualLogic tradition of performance scaling linearly with capacity. With up to 67% IOPS improvements on typical workloads over previous-generation EqualLogic arrays, the PS4100 Series is designed to grow with your data demands—all while providing simple management and seamless expansion using innovative Data technology. Dell doesn’t just sell you more storage—Dell delivers comprehensive end-to-end solutions to help you store and manage your data so you can efficiently move the right data to the right place at the right time for the right cost.


Storage Controllers: Dual controllers, each with 4GB† memory and cache-to-flash memory data protection

Network Interfaces: Two (2) GbE copper, One (1) 10/100 copper (optional management network only) per controller

Hard Disk Drives: Slots for 24 Hot-pluggable 10K SAS disk drives

Volumes: Up to 256

Snapshots: 128 per volume/up to 2,048 total per group

Host Protocol: Any standards-compliant iSCSI initiator

OS Supported: Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3/3.5/4/4.1/5, ESXi 3.5/4/4.1/5, Citrix® XenServer™, Novell® NetWare®

RAID Supported: RAID 5, RAID 6, RAID 10, and RAID 50

TCP network support: IPv4, IPv6 core support

Expansion Option: Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. A maximum of two (2) PS4000 and PS4100 Series arrays can be in a group

Power: 100-240 VAC +10% single phase

Dimensions: 3.41 x 17.57 x 21.3 (inches) 2.5" Chassis 

Weight: 54 lb (24.49 kg) 2.5" chassis 

Rack Support: Dell ReadyRails sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Series arrays to snap into place with screws or other hardware Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Series arrays to be mounted in racks whose posts have round holes

 Included: PS4100X 2.5" Chassis with Dual controllers, Dual Power Supplies/Fans (hard drives and rails purchased separately).

 If you are looking for a configured disk array please contact us.