Used Cisco 3825-V/K9 Integrated Services Router with AC power
With the unique integrated services architecture of the Cisco 3800 Series, customers can now securely deploy IP Communications with traditional IP routing and still leave the network module slots available for additional advanced services. With the optional integration of a wide array of service modules, the Cisco 3800 offers the ability to easily integrate the functions of standalone network appliances and components of standalone network appliances and components into the Cisco 3800 Series chassis itself. Many of these network modules, such as the Cisco Network Analysis, Cisco Intrusion Detection System, and Cisco Content Engine network modules, have embedded processors and hard drives that allow them to run largely independently of the router while allowing their management from a single management interface. This flexibility greatly expands the potential applications of the Cisco 3800 Series beyond traditional routing while still maintain the benefits of integration: ease of management, lower solution costs, and increased speed of deployment.
Integrated PVDMs support analog voice, digital voice, conferencing, transcoding, and secure Real-Time Transport Protocol (SRTP) media while enabling network-module or AIM slots for switching, concurrent applications, content, and voice mail.
- The 3825 houses (2) integrated copper gigabit ports, 2NM, and 4HWIC slots as well. Other modular connectivity includes (1) SFP, (2) AIM, (4) PVDM and (2) USB 1.1 ports. You will also find your standard RJ45 console and auxiliary ports.
- The CISCO3825 offers optional Data Link Layer switching and 802.af PoE support through the use of EtherSwitch modules.
- This router also supports the bandwidth requirements for multiple Fast Ethernet interfaces per slot, TDM (Time Division Multiplexing) interconnections, and fully integrated power distribution for modules supporting the PoE protocol all while maintaining compatibility for older, legacy modules.
- 256MB DRAM / 64MB Flash Memory Installed
- Unit is fully tested and the configuration has been reset to factory default.
- Cisco 3825 Router
- PVDM2-64 Card
- IOS SP Services
- Cisco DB9 to RJ45 Console Cable
- AC Cord (CAB-AC)
- Cisco 3825 Rack Mount Kit
Unsure if this is the right router for you? please contact us so we can help.
Cisco 3825 Integrated Services Router Specifications
Architecture
Network Module Slots: These slots can accommodate a standard network-module, enhanced-network-module (NME), enhanced-extended-network-module (NME-X), and high-density extension module (EVM-HD). The NME-X, when available, will have a wider form factor than the NME. Two side-by-side NME slots can be combined to accommodate one double-wide network module (NMD)or when available, a double-wide enhanced extended network module (NME-XD). The Cisco 3825 supports: NM, NME, NME-X, NMD, NME-XD, EVM-HD
Maximum number of network modules: 2
Maximum number of MD/NMD-XD: 1
Maximum number of EVM-HD: 1
Number of high-speed WIC (HWIC) slots: 4
Number of fixed LAN ports: 2 x10/100/1000 (Gigabit Ethernet)
Number of SFP ports: 1
Number of AIM slots: 2
Number of PVDM slots: 4
Number of USB 1.1 ports: 2
Embedded VPN: Yes
Number of console ports: 1
Number of auxiliary ports: 1
Memory:
Default: 64MB Compact Flash and 256MB DDR SDRAM
Maximum: 256MB Compact Flash and 1GB DDR SDRAM
Physical Specifications
Dimensions: 3.5 x 17.1 x 14.7 in.
Rack Units: 2 U
Weight: 23 Lb
Rack Mounting: Yes
Wall Mounting: No
Power Specifications
AC Input voltage: 100-240 VAC, auto-ranging
AC Input Current: 3A (110V) / 2A (230V), startup current 50A maximum (one cycle)
DC Input voltage: 24-60 VDC, auto-ranging positive or negative
DC Input Current: 12A (24V) / 5A (60V), startup current 50A<10ms
Redundant Power Supply: External Only (CISCO RPS 675)
